When you’re comparing patient positioners, it’s easy to get pulled into specs like foam density or wedge angle. But the thing that actually determines day-to-day performance is simpler: what’s on the outside of it.
The cover is what your team touches, wipes down, and relies on through every scan. It’s usually the first surface to show wear, whether that’s a seam that lets fluid in, a coating that starts to crack, or a surface patients don’t find comfortable. Before your department settles on a positioner, it’s worth knowing what’s actually covering it. Let’s take a look at a few of the options out there.
Closed-Cell Foam – Uncovered
Some positioners skip a separate cover and rely on the molded surface of the closed-cell foam itself as the barrier. Closed-cell foam is naturally fluid resistant. When the surface stays intact, it holds up reasonably well to regular hospital-grade disinfectant. But there’s no separate cover layer, so once the surface is nicked, torn, or worn through at seams and high-contact points, that damaged area is difficult to fully clean or restore. That’s usually what determines when a positioner gets pulled from rotation, often sooner than a department expects from a low-cost option.
Coated Foam Positioners
Adding a coating gives a foam positioner a separate wipe-able layer. How well it holds up depends a lot on the coating itself. Polyurethane coatings vary widely in what they’re rated for, some are built for general upholstery or industrial use rather than the frequency and strength of disinfectants imaging departments use every day. Under that kind of repeated exposure, coatings not suited for it can eventually crack or peel. Coatings engineered and tested specifically for healthcare cleaning protocols tend to hold up better. It’s worth asking what a coating is rated for rather than assuming all coated foam performs the same way.
Vinyl Cover Bolsters
Vinyl has long been a standard choice for waterproof positioning products. It resists fluids and cleans up easily. But it handles differently than a stretch fabric cover day to day. Vinyl is a stiffer material with less give, so it can be more prone to stretching out under repeated use, sometimes called hammocking, without fully springing back. Its surface also tends to be less breathable and higher friction against skin. Some departments notice this most on longer studies, like extended MRI or nuclear medicine holds, where a patient stays on the same surface for a while.
The CHP Difference: 4 Way Stretch Cover Build For the Imaging Suite
CHP covered wedges and positioners use a premium 4-way stretch fabric cover, engineered specifically for clinical environments. It’s designed around the day-to-day realities of a busy imaging department, where products are used, cleaned, and relied on constantly.
“Technologists consistently tell us this fabric feels better for patients, cleans up faster between scans, and holds its shape and durability longer than what they used before.”
The surface is soft and low-friction, so positioning and repositioning go more smoothly. And it’s built to take repeated disinfectant wipe-downs without cracking or peeling.
At a glance:
- Softer, more comfortable surface than vinyl, with a low-friction feel patients notice
- Faster wipe-down between patients, with no special handling required
- Fluid resistant surface that holds up to daily cleaning protocols
- Durable for repeat disinfecting, maintaining its shape and appearance through daily use
- Latex free and MR safe
How our 4 Way Stretch Material Compares
Closed-cell foam, coated foam, and vinyl each solve for something different: foam alone keeps cost down, coatings add wipeable water resistance, and vinyl offers straightforward durability. But each one typically trades off against comfort, cleaning speed, or long-term wear somewhere in daily use. CHP’s 4-way stretch cover was designed to hold up on all three at once, so your team isn’t choosing between patient comfort and a product that holds up.
The Warranty That Backs the Build
Material is only part of the story. Every CHP positioner and wedge also comes with a 90-day warranty. It reflects how the products are actually built: high-density foam that holds its shape under repeated compression, and a cover designed to withstand the cleaning protocols imaging suites run multiple times a day.
Ready to See the Difference Yourself?
Take a look at our full line of covered positioning wedges, including head immobilizer positioning pads, built for MRI, CT, and nuclear medicine studies, or browse our complete range of foam positioners with the 4-way stretch cover standard.








